10kVA.240VDC.220VAC SYNCHR/ATS/STS/BYPASS

10kVA 240VDC 220VAC SYNCHR ATS STS BYPASS inverter

Purpose:

The inverter converts DC voltage into sinusoidal AC at 50 Hz.
The inverter can supply a wide range of single-phase industrial and domestic loads rated 220 V AC at 50 Hz, up to 10 kVA.
The inverter has a built-in automatic transfer switch (ATS) that transfers the load automatically between the mains incomer and the inverter according to the priority the user sets on the inverter's built-in controller.
The inverter has a built-in high-speed thyristor switch (static transfer switch) that transfers the load quickly between the mains incomer and the inverter.
The inverter monitors the state of the battery and the mains and indicates input and output status.

Distinctive features:

Pure sine wave output. Silent, high-efficiency operation
Apparent output power 10 kVA
A high-efficiency combined liquid and air cooling system with four cooling levels and five operating modes.
The battery charge monitoring system extends battery life by reducing the number of charge-discharge cycles
A backlit LCD control panel showing the inverter's output currents and voltages. Six LED indicators show the inverter's status.
Audible warning signals indicating the various operating modes, faults and system problems.
Operating modes, the monitored battery and grid parameters, and the built-in ATS modes can all be programmed from the control panel.
Inverter run/fail signalling relay. Low standby consumption (under 15 W)
Automatic overload and over-temperature protection. Programmable deep-discharge battery protection
Soft start with heavy loads
Built-in high-speed thyristor ATS.
Built-in automatic bypass that transfers the load to mains supply if the battery is fully discharged or absent.