30kVA.240VDC.220/380VAC SYNCHR/ATS/STS/BYPASS

30kVA 240VDC 220/380VAC SYNCHR ATS STS BYPASS inverter

Purpose:

The inverter converts DC voltage into three-phase sinusoidal AC at 50 Hz.
The inverter can supply a wide range of industrial and domestic loads rated 220/380 V AC at 50 Hz, up to 30 kVA for three-phase loads and up to 10 kVA per phase for single-phase loads.
The inverter has a built-in automatic transfer switch (ATS) that transfers the load automatically between the mains incomer and the inverter according to the priority the user sets on the inverter's built-in controller.
The inverter has a built-in high-speed thyristor switch (static transfer switch) that transfers the load quickly between the mains incomer and the inverter.
The inverter monitors the state of the battery and the mains and indicates input and output status.

Distinctive features:

Pure sine wave output
Silent, high-efficiency operation
Apparent output power 30 kVA
A high-efficiency combined liquid and air cooling system with four cooling levels and five automatic operating modes.
The battery charge monitoring system extends battery life by reducing the number of charge-discharge cycles
A control panel with a blue-backlit LCD showing the inverter's output currents and voltages.
Six LED indicators show the inverter's status.
Audible warning signals indicating the various operating modes, faults and system problems.
Operating modes, the monitored battery and grid parameters, and the built-in ATS modes can all be programmed from the control panel.
Inverter run/fail signalling relay. Low standby consumption (under 20 W)
Automatic overload and over-temperature protection
Programmable deep-discharge battery protection
Soft start with heavy loads
Built-in high-speed thyristor ATS.
Built-in automatic bypass that transfers the load to mains supply if the battery is fully discharged or absent.